Loading... Please wait...

PRODUCTS

Support

Support

Download Templates

Download Sizing Charts

Art Submission Guidlines

View Video Tutorials

If you’re ready to start printing, you can find the resources you need below.

Time and Temperature Settings

Fabric
Mico Fiber
Basic Fabric
Solar Fabric
Sweatshirt
Performance Touch
Compression
Fleece
Throws
SubliSocks
Temp.
370°
385°
370°
380°
385°
370°
380°
385°
370°
Time
35-sec.
30-sec.
35-sec.
30-sec.
30-sec.
35-sec.
35-sec.
75-sec.†
30-sec.
For best results, use a manual press and the Vapor Foam Kit with teflon for maximum image quality and reduced production efforts. †Vapor strongly recommends pre-pressing throws for 25 to 30 seconds.

 

Screen-printing tips on Mossy Oak Sublimated Camo designs

  • Contact your ink supplier for their recommendation with printing on 100% polyester Sublimated Apparel
  • We Recommend printing an under base color (not typical white). An under base gray or black is designed to block migrating dyes
  • Print order should be Under base –> flash cure –> color – > flash cure – > color -> then dryer
  1.  Ink pigment colors should be performance based which are designed to print on polyester with a lower curing temperature
  2.  Be mindful the more locations chosen, the more the garment goes through the dryer gaining potential for dyes migrating
  3.  We recommend 2 locations, 3 at a Maximum
  •  Please test with your inks in your shop.  Adjustments may need to take place ie. two prints of under base.
 

What's News

Copyright 2019 Vapor Apparel. All Rights Reserved.
 Sitemap |